The 23rd China (Jinjiang) International Footwear Industry Expo of laser cut machineThe reporter learned from the press conference held by the Jinjiang Municipal Government that the 23rd China (Jinjiang) International Footwear Industry and the 6th International Sports Industry Expo will be held at the Jinjiang International Convention and Exhibition Center from the 19th to t...
The criterion of repair and maintenance for the mechanical transmission components of laser cutting machine 1. Guide rail, straight axis, sliding block (Metal roller), nylon roller The guide rail and straight axis are the core components of the machine, their function is guiding and supporting. To achieve the high precision of machine processing, the guide rail a...
Daily maintenance attention of co2 laser cutterThe machine’s stable normal working is tightly relative to the proper operation and daily maintenance. The following content is about the laser cutting machine daily maintenance:1. Water changing and chiller cleaning ( The suggestion is cleaning the water tank and changing recycling water once a week.)Attention: Be sure that th...
Operation attention for the Boming laser cut machine1. Switch on the general power, then switch on the laser power when starting machine; Switch off the laser power, then switch off the general power when stopping the machine.2.After machine starting, check if the inlet and outlet water in chiller can flow freely; the seller isn’t responsible for the breaking of laser tube ...
Working Attention of co2 laser cutter engraver machine:1. Connect the right wire (big red positive wire and small red negetive wire) in right position of the laser tube (check installation pictures). 2. Connect the right water pipe (long one is water inlet pipe; short one is the water outlet pipe: light emiting side) in the right position of laser tube. The water inlet pipe...
