What to pay attention to when laser cutter machine cutting
Laser cutting is one of the thermal cutting methods. The focused high-power laser beam is irradiated to the product workpiece, the material irradiated by the laser rapidly melts、 vaporizes、 burns or reaches the ignition point. At the same time, the air pump blows out the molten chemical substances, and then achieve the division of the product workpiece.
From the basic cutting principle of laser cutter machine, the laser itself cannot become a light source, the laser will only produce heat after it is digested and absorbed on the surface of the processing parts. In different surface conditions of raw materials, the specific conditions of laser digestion and absorption are different, so the heat generation conditions will also be greatly affected. Generally laser cutting will cause the following effects:
1. The cutting efficiency will be reduced, the actual effect will be slightly worse, and the damage rate will be higher.
2. Cause greater damage to the product. When cutting, it will cause environmental pollution, the quality of the cut products will be affected, and the rejection rate will be high.
3. The overall uniform material cutting will be better than the uneven material cutting. Because the overall uniform material digestion and absorption laser is also uniform, it can carry out better cutting. For the production and processing of raw materials with uneven surfaces, need to make the surface conditions of raw materials uniform before cutting.