What is the disadvantages of UV laser marking machine

1. The product material is targeted:

In theory, the UV laser marking machine cannot mark metal products, and wood products cannot be marked. If you need to mark metal products, it is recommended to use a fiber laser marking machine. If you need to mark wood products, it is recommended to use a carbon dioxide laser marking machine. If these two types of material products only need to remove the paint on the surface. Font, UV laser marking machine can also do it.

2. Expensive and difficult to move

The general price of ultraviolet laser marking machine is 3-10w, which is 3-4 sets of fiber laser marking machine compared with two carbon dioxide laser marking machines. The total weight of the UV laser marking machine is about 200kg (with water tank). It can be moved appropriately in short distance with the pulley. It is a bit difficult to move long distances. If it is automated, it will be more difficult to move. After moving, maybe the parameters need to be adjusted before the corresponding effect can be produced.

3. Maintenance

In maintenance, you need to pay attention to dust and frost. During use, you need to pay attention to the temperature of the laser. If the temperature is too high, an alarm will be issued. Check whether the water tank is sufficient for water cooling. Pay attention to whether the fan has too much dust for air cooling. It is recommended to be used in a dust-free workshop and indoors above 0°C. In order to reach the normal life, if the maintenance is not good, the life of the laser will be greatly reduced.