What is the attention of laser engraving machine

    The difference between laser engraving machine and mechanical CNC engraving machine is that the mechanical CNC engraving machine adopts the way of mechanical processing to carve, and the laser engraving machine uses the heat of laser to carry out carving on the material. Compared with mechanical CNC engraving machine, laser engraving machine has faster speed, finer effect and  higher precision. So do you know how to use laser engraving machine correctly?

1. Install the ground wire correctly.

2. The water cooling of laser engraving machine should be smooth. Whether you use water chiler or a circulating pump, make sure that water flows smooth.

3. Excellent ventilation, cleaning and maintenance of laser engraving machine at any time and anywhere is the necessary condition for the normal operation of laser engraving machine.

4. The working temperature of laser engraving machine should be in the range of 5-35℃.

5. Avoid other mechanical equipment to use too much electricity and affect the laser engraving machine, although not common, but should be reduced as far as possible.

6. Install a lightning rod to prevent lightning strikes.

7. The computer works steadily.

8. Maintenance of laser engraving machine guide rail:  guide rail will stick on a lot of dust in the whole process of operation, need to be cleaned in time.

9. Maintenance of laser engraving machine air blower: after the machine runs for a period of time, the blower and exhaust pipe will deposit a lot of dust, need to be cleaned in time.

10. Laser engraving machine screw tightening:  after working a period of time, the screw at the junction will be loose, need to tighten in time.

11. After woking a period of time, there will be much dust in the focus lens and reflective mirror, need to cleaned in time.