How to maintain the Co2 laser marking machine daily

    Machinery and equipment need maintenance. The co2 laser marking machine has a comprehensive set of maintenance methods, so that the service life will be closer to the theoretical service life.

    Co2 laser marking machine, also known as carbon dioxide laser marking machine, can be divided into two types according to laser type: glass tube and metal tube. In terms of service life, the service life of metal tubes is longer, but the maintenance methods are roughly the same, and it is necessary to pay attention to temperature and air environment.

    Co2 laser marking machine needs to pay attention to the small details of maintenance:

1. Operating temperature requirements

    Co2 laser marking machine works at a suitable temperature and cannot be placed outdoors, especially in winter, and the general working environment temperature is between 5 °C and 30 °C

2. Access power supply voltage requirements

    220v voltage is required, and the ground wire needs to be connected to avoid accidents.

3. Air quality requirements

    A clean room is better. If it is not a clean room, pay attention to the air quality. If the air quality is poor, pay attention to regularly clean the dust inside the machine and the lens to avoid affecting the marking effect. The workshop should be equipped with a smoking machine, which can not only protect the operator from inhaling harmful gases, but also prevent the gas from entering and adhering to the surface of the machine, affecting the service life.

4. Ventilation and heat dissipation requirements

    There are two types of Co2 laser marking machine: air cooling and water cooling. For air cooling, pay attention to whether the cooling effect of the fan can meet the requirement after a period of use. For water cooling, pay attention to the water level of the water chiller. During use, always pay attention to the situation of the marking machine. It is recommended to turn off the laser marker to check the cause if the temperature alarm is on. Try to ensure that the laser is turned off when people leave.

5. maintenance requirements

    The laser marking machine needs maintenance after a period of use, which can prolong the service life of the machine. The maintenance time is determined according to the use environment and use time. Maintenance is generally done once every 3-6 months. Maintenance scope: inspection of all aspects of the laser tube, dust cleaning, galvanometer cleaning, internal cleaning of the marking machine and inspection of lines, etc.

    The maintenance process must be carried out by professionals. Non-professionals are prohibited from disassembling and maintaining the machine to avoid unnecessary losses or personal injury.